2000 Saab 9-3 Owner's Manual - Page 181

Car care 181 Changing bulbs WARNING Before changing a bulb in the engine bay, switch off the engine to avoid the danger of fingers and hands being injured by moving parts. The radiator fan can cut in even when the engine is switched off. NOTE Switch off the ignition before changing a bulb, to avoid possible short-circuiting. 1 Headlight bulb 2 Parking-light bulb Headlight 1 2 3 4 5 Unscrew the cover from the back of the light units. Unplug the connector. Unhook the spring clip by pushing it forward and then to the side. Remove the bulb. Insert the new bulb, without touching the glass with your fingers. Line it up so that the three lugs fit into the corresponding slots in the reflector and secure it with the spring clip. IMPORTANT! When changing bulbs, use the same type of bulb, (e.g. Long-life). Headlight aiming, see page 208. Parking lights The parking-light bulb is fitted in the same light unit as the headlight bulb. 1 Remove the bulb holder from the lamp unit. 2 Then take the bulb out of the holder. NOTE Do not fit bulbs with a rating above 60/55W, since the headlight reflector and the wiring of the car are not designed for a higher wattage. Do not touch the glass of the bulbs with your fingers. The oil on your skin can shorten the life of the bulb. IB903