2000 Saab 9-3 Owner's Manual - Page 209

Car care Open the hood and locate the vertical aim level (B) that you can see through the top of the headlight lens. If you find that the headlight needs adjustment follow these steps: 1 Locate the vertical aiming device (A) located behind and below the outer headlight assembly. 2 Turn the vertical aiming screw with a 0.24 in. (6 mm) Hexagonal Allen wrench until the bubble inside the level is centered between the two red lines (zero). 3 Check the horizontal aim (1) and adjust as necessary. The horizontal aiming device (2) is located behind the inner headlight assembly. Turn the horizontal aiming knob until the zero (0) line on the knob aligns with the zero mark on the graduation scale. 4 Recheck the vertical aim to make sure it is still correct after the horizontal aim adjustment. Readjust as necessary. 209 A B 2 1 IB1169 Vertical adjustment A Vertical aiming device B Vertical aim level Horizontal adjustment 1 Horizontal aim 2 Horizontal aiming device NOTE To make sure that your headlights are aimed properly read all instructions before beginning. Failure to follow these instructions could cause damage to headlight parts or a not correctly aimed headlight. IB1170