2000 Saab 9-3 Owner's Manual - Page 182

2000 Saab 9-3 Manual

Page 182 highlights

182 Car care IB904 1 Retaining screw 2 Turn signal bulb Side-mounted turn signal 1 Slide the lens forward so that its rear part can be pulled out. 2 Change the bulb. 3 When refitting, make sure that the groove in the spring engages the edge of the body panel and that the rubber gasket is correctly positioned. Front turn signal bulb To change the bulb, the complete lamp unit has to be removed. 1 Loosen the screw (1). There is no need to remove it completely. 2 Carefully remove the complete lamp unit. 3 Grasp the two plastic tabs and turn the bulb holder counterclockwise. 4 Pull the bulb holder out of the lamp unit and change the bulb. 5 Check that the new bulb is firmly in place and has good contact. 6 When mounting the lamp unit, see that the two guide lugs on the rear edge of the unit come inside the edge of the body panel. 7 Insert the lamp unit in towards the headlight and see that the front bracket comes under the screw. Tighten the screw (1). IB906

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236

182
Car care
Front turn signal bulb
To change the bulb, the complete lamp unit has to be removed.
1
Loosen the screw (1). There is no need to remove it completely.
2
Carefully remove the complete lamp unit.
3
Grasp the two plastic tabs and turn the bulb holder counterclock-
wise.
4
Pull the bulb holder out of the lamp unit and change the bulb.
5
Check that the new bulb is firmly in place and has good contact.
6
When mounting the lamp unit, see that the two guide lugs on the
rear edge of the unit come inside the edge of the body panel.
7
Insert the lamp unit in towards the headlight and see that the
front bracket comes under the screw. Tighten the screw (1).
Side-mounted turn signal
1
Slide the lens forward so that its rear part can be pulled out.
2
Change the bulb.
3
When refitting, make sure that the groove in the spring engages
the edge of the body panel and that the rubber gasket is correctly
positioned.
IB904
1
Retaining screw
2
Turn signal bulb
IB906