2006 Suzuki Reno Owner's Manual - Page 109

INSTRUMENT PANEL Auto Reverse When the tape reaches at the end of one side, it will automatically reverse and play back the other side of tape. Fast Forward / Rewind Function Fast Forward: To fast forward wind a tape, press the fast forward button for more than 1.5 seconds. The "FF" indicator appears on the VFD. When the tape reaches the end, it is automatically reversed and played back from the beginning of the opposite side. To stop the fast forward movement, press the cassette on/program button. Rewind: To rewind a tape, press the rewind button for more than 1.5 seconds. The "RE" indicator appears on the VFD. When the tape is fully rewound, it is played back from the beginning of the same side. To stop the rewind movement, press the cassette on/program button. AMS (Auto Music Search) Function The AMS function searches for the beginning of a music track by identifying the blank interval between tracks. If there is a blank interval within a music track or there is no interval between music tracks, the system may not search correctly. For the AMS function to work properly, an interval of at least 4 seconds between each music track is required. To listen to the next track, press the button for less than 1.5 seconds. The "A-FF" indicator appears on the VFD. The tape moves forward and it is played back from the beginning of the next track. If you press the rewind button for less than 1.5 seconds, the "A-RE" indicator appears on the VFD and the tape rewinds. Then it is played back from the beginning of the current track. To listen to the previous track, press the rewind button again when the tape stops at the beginning of the current track. The AMS function is automatically canceled after finishing its function. To cancel in the middle of AMS operation, press the fast forward or rewind button again. Metal Tape Auto-Sensing This unit has metal tape auto-sensing function. If a metal tape is inserted, the "MTL" indicator appears on the VFD. Dolby B Noise Reduction Function Press the dolby B noise reduction button when playing back a tape which has been recorded using a dolby noise reduction system. The dolby symbol will be illuminated on the VFD. This system improves the signal to noise ratio of the tape section, resulting in reduced audible "hiss" during playback. Repeat Function Press the "RPT" button to repeatedly listen to the current track. The repeat indicator "RPT" will be illuminated in the VFD, and the current track will be played repeatedly until this function is canceled. To cancel this function, press this button again. The repeat function requires an interval of about 4 seconds between each music track to work properly. 3-36