Alpine CDA-117 Owner's Manual (english) - Page 24

Turning Mute Mode On/Off (INT Mute) If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.  Setting item: INT Mute Setting contents: ON / OFF (Initial setting) Setting the AUX+ Setup Mode You can input the audio of an external device, (such as a Portable audio player) to the BLUETOOTH interface connector of this un t. A special Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH interface connector as an AUX IN. A portable music device and a BLUETOOTH INTERFACE (KCE-400BT) cannot be connected to the BLUETOOTH interface connector at the same time.  Setting item: AUX+ Setup Setting contents: ON / OFF (Initial setting) ON*: Set to ON when a portable device is connected. If SOURCE is pressed and AUX+ is selected, the sound of the portable device is input to the unit. * You can change the AUX+ Name display when AUX+ Setup is set to ON. Press ENTER when AUX+ SETUP is set to ON, and select AUX+ Name by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired AUX+ Name. OFF: When set to OFF, AUX+ source cannot be selected. Setting the AUX+ Level (AUX IN GAIN) After setting to ON in "Setting the AUX+ Setup Mode", this setting can be carried out.  Setting item: AUX IN GAIN Setting contents: Low (Initial setting) / High Low: Decreases the external input audio level. High: Increases the external input audio level. Setting the External Digital Input When an ALPINE Ai-NET compatible digital audio processor (PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel surround sound. You can change the Digital AUX name display when Digital AUX is set to ON. Press ENTERwhen Digital AUX is set to ON, and select Digital AUX name by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired Digital AUX name.  Setting item: Digital AUX Setting contents: ON / OFF (Initial setting) Notes • Press SOURCE, and select the D.Aux mode, and adjust the volume, etc. • After input selection is completed, turn the ignition off and back on again. Setting of the optical digital input switch is completed. 22-EN • Depending on the connected audio processor, DVD player sound may continue to be output, even though the source is changed to another one. If this occurs, set the DVD player's power to OFF. Setting the AUX Mode (V-Link) You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX name display when AUX IN is set to ON. Press ENTER when AUX IN is set to ON, and select AUX Name by turning the Rotary encoder, and then press ENTER. After that, turn the Rotary encoder to select the desired AUX name. If the KCA-410C is connected, it is possible to select two AUX names.  Setting item: AUX IN Setting contents: ON / OFF (Initial setting) Note • Via KCA-410C, up to 2 external devices with RCA output can be connected. In this case, press SOURCE to select AUX mode and then press BAND to select your desired device. Changer Name Setting This setting is used when the head unit is connected to the USB Adapter for MP3 (KCA-620M). You can set the name to be displayed on the unit depending on the device to which the USB Adapter for MP3 (KCA-620M) is connected.  Setting item: Changer Name Setting contents: Changer (Initial setting) / USB / Portable Connecting to an External Amplifier When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.  Setting item: Power IC Setting contents: ON (Initial setting) / OFF Power IC ON : The speakers are driven by the built-in amplifier. Power IC OFF : Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and can not drive speakers. POWER IC ON: SPEAKER RIGHT FRONT Speakers Front right SPEAKER RIGHT REAR Rear right SPEAKER LEFT REAR SPEAKER LEFT FRONT Rear left Front left