Alpine CDA-117 Owner's Manual (english) - Page 9
Getting Started - manual
UPC - 793276711656
View all Alpine CDA-117 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Rotary encoder/ENTER/ (OPEN) /ESC Detaching and Attaching the Front Panel Detaching 1 Turn off the unit power. 2 Press (OPEN) to open the front panel (figure 1). To close the front panel, press the left side until it locks as shown in the figure 2. SOURCE/ SETUP MUTE Accessory List • Head unit 1 • Power cable 1 • USB Cable 1 • Interface cable for iPod 1 • Mounting sleeve 1 • Carrying case 1 • Bracket key 2 • Screw (M5 × 8 4 • Remote Control 1 • Battery (AAA size 2 • Owner's Manual 1 set Turning Power On and Off 1 Press SOURCE to turn on the unit. Note • The unit can be turned on by pressing any other button. 1 Press and hold SOURCE for at least 2 seconds to turn off the unit. Note • The first time power is turned on, the volume will start from level 12. Source Selection 1 Press SOURCE to change the source. TUNER XM/SIRIUS*1 DISC USB*2/USB iPod*3 AUX+*4 Bluetooth Audio*5 CHANGER*6 TUNER *1 Only when XM Radio or SIRIUS Radio is connected. *2 Displayed only when no iPhone/iPod is connected. *3 Displayed only when the iPhone/iPod is connected. *4 Displayed only when the AUX+ SETUP is set to ON, refer to "Setting the AUX+ Setup Mode" on page 22. *5 Displayed only when Bluetooth IN is set to ADAPTER, refer to "Setting the BLUETOOTH Connection" on page 21. *6 Only when the CD changer is connected. figure 1 figure 2 3 Grasp the front panel firmly, slide to the left , and then pull to remove. Notes • The front panel may become hot in normal usage (especially the connector terminals on the back of the front panel). This is not a malfunction. • To protect the front panel, place it in the supplied carrying case. • When detaching the front panel, do not apply excessive force as it may result in malfunction. • Do not leave the front panel open, or drive the car with the panel open as it may result in an accident or malfunction. Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit. Notes • Before attaching the front panel, make sure that there is no dirt or dust on the connector terminals and no foreign object between the front panel and the main unit. • Attach the front panel carefully, holding the sides of the front panel to avoid pushing buttons by mistake. 7-EN