Alpine CDA-117 Owner's Manual (english) - Page 38

Adjusting Subwoofer Level/Bass Level/ Treble Level/Fader (Between Front and Rear)/Balance (Between Left and Right)/ Black Out in MultEQ mode You can change these settings to create your own preference in MultEQ (Curve 1 or Curve 2) mode. 1 Press AUDIO repeatedly to select the MultEQ adjustment item. SUBWOOFER LEVEL*1  BASS LEVEL*2  TREBLE LEVEL*2  BALANCE  FADER*3  BLACK OUT*4  DEFEAT  VOLUME  SUBWOOFER LEVEL *1 When the SUBWOOFER mode is set to OFF, its level cannot be adjusted. *2 This function is inoperable when MultEQ is set to OFF. *3 If you set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.) switch of the IMPRINT audio processor (PXA-H100) to 2.2ch (3WAY), you cannot adjust the FADER mode. For details, refer to the Owner's Manual of PXA-H100. *4 When Blackout mode is turned on, all display indications on this unit will turn off to reduce power consumption. This additional power enhances the sound quality. If any button on the unit is pressed during the Blackout Mode, the function is displayed for 5 seconds before returning to Blackout mode. Note • If no operation is performed for 5 seconds after selecting the SUBWOOFER LEVEL, BASS LEVEL, TREBLE LEVEL, FADER, BALANCE, BLACK OUT or DEFEAT mode the unit automatically returns to normal mode. 2 Turn the Rotary encoder to change the setting as below. Subwoofer level Bass level Treble level Balance Fader Black Out Defeat Volume 0 ~ 15 −7~+7 −7~+7 −15 (L) ~ 15 (R) −15 (R) ~ 15 (F) ON/OFF ON/OFF 0 ~ 35 Note • Depending on the connected devices, some functions and display indications do not work. Adjusting Sound Setting in Manual Mode You can change these sound settings to create your own preference when the MultEQ mode is set to Mult EQ OFF (Manual Mode). Use steps 1 to 4 to select one of the Sound menu modes to modify. See the applicable section below for details about the selected item. 1 Press and hold SOUND SETUP for at Least 2 seconds to activate the Sound menu selection mode. 2 Turn the Rotary encoder to select the desired item, and then press ENTER. MultEQ Mode  Subwoofer  SUBW. System*1  SUBW. Phase*1  SUBW. Channel*1  Factory's EQ  TW Setup*2  Filter Type  Media Xpander  MX Level*3  EQ Mode  TCR Parameter  Sound Field*4  MultEQ Mode (e.g. Select Subwoofer) *1 These functions are inoperable when Subwoofer is set to OFF. *2 This function can be operable only when PXA-H100 (sold separately) is connected and 2.2ch (3WAY) mode is set. For details, refer to the Owner's Manual of PXA-H100. *3 This function is inoperable when Media Xpander is set to OFF. *4 In step 2, three sound adjustment items (Parametric EQ/ Graphic EQ, T.Correction, X-Over) can be selected in Sound Field Adjustment mode, turn the Rotary encoder to select the desired item, and then press ENTER to continue to step 3. 3 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select Subwoofer ON or Subwoofer OFF) 4 Press and hold ESC for at least 2 seconds to return to normal mode. Notes • Media Xpander, Factory's EQ, Parametric EQ/Graphic EQ, EQ Mode and MX Level Adjustment are inoperable when DEFEAT is set to ON. • Pressing ESC returns to the previous Sound menu mode. • If no operation is performed for 60 seconds, Sound menu mode is canceled. Turning Subwoofer ON/OFF When the subwoofer is on, you can adjust the subwoofer output level.  Setting item: Subwoofer Setting contents: ON (Initial setting) / OFF ON: The subwoofer signal is output from the Subwoofer RCA Connectors (refer to "Connections" on page 52). OFF: No subwoofer signal is output from the Subwoofer RCA Connectors (refer to "Connections" on page 52). Setting the Subwoofer System When the subwoofer is on, you can select either System 1 or System 2 for the desired subwoofer effect.  Setting item: SUBW. System Setting contents: System 1 (Initial setting) / System 2 System 1: Subwoofer level changes according to the main volume setting. System 2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible. 36-EN