Alpine CDE-154BT Owner's Manual (english) - Page 15
Sound Setting
View all Alpine CDE-154BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Sound Setting AUDIO/SETUP Rotary encoder BASS /ENTER Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat 1 Press AUDIO repeatedly to choose the desired mode. Each press changes the mode as follows: SUBWOOFER*1/*2 BASS LEVEL*2/*3 TRE LEVEL*2/*3 BALANCE FADER DEFEAT VOLUME SUBWOOFER *1 When the subwoofer mode is set to OFF, its level cannot be adjusted, refer to "Turning Subwoofer ON/OFF" on page 16. *2 Not displayed when BASS ENGINE SQ mode is selected. Refer to "Switching BASS ENGINE SQ mode" on page 18. *3 Adjustable only when DEFEAT is OFF. Subwoofer Bass level Treble level Balance Fader Defeat Volume +0 ~ +15 −7 ~ +7 −7 ~ +7 L15 ~ R15 R15 ~ F15 ON/OFF 0 ~ 35 Note • If no operation is performed for 5 seconds, the unit automatically returns to normal mode. 2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting DEFEAT ON, previously adjusted level settings of BASS and TREBLE will return to the factory defaults. Sound Setting You can flexibly customize the unit to suit your own preference and usage. From the AUDIO SETUP menu, Audio Setting can be modified. Use steps 1 to 5 to select the category you wish to modify. For details on how to change each setting, see the following sections below. 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select AUDIO, and then press ENTER. 3 Turn the Rotary encoder to select the desired sound setting menu, and then press ENTER. EQ PRESETS*1/*2/*3 BASS ENGIN*4 PARAMETER*5 9BAND P-EQ*1/*3/*6 SOURCE VOL HPF*1/*3 SUBWOOFER*7 SUBW LPF*1/*3/*8 SUBW PHASE*1/*8/*9 SUBW SYS*3/*8 POWER IC MX SETTING*1/*3 EQ PRESETS *1 Adjustment cannot be performed when DEFEAT is set to ON. *2 Any changes made to either EQ PRESETS or 9BAND P-EQ are reflected in the others' settings. *3 These items are not adjustable in BASS ENGINE SQ mode. If you want to adjust these items separately, follow the confirm message and select "YES" to exit BASS ENGINE SQ mode, then make the setting. *4 Not displayed when the Audio Setup mode is activated by pressing BASS. *5 Not displayed when BASS ENGIN is set to OFF. *6 In step 3, after selecting a Band (BAND1 to BAND9) from 9BAND P-EQ adjustment mode. Turn the Rotary encoder to select the desired item, and then press ENTER to continue to step 4. *7 This item is also related to BASS ENGINE SQ mode when you adjust sound settings via the TuneIt App on a Smartphone. Refer to "Adjusting the sound via the Smartphone" on page 20. *8 These functions are inoperable when Subwoofer is set to OFF. *9 Not displayed when SUBW LPF is set to OFF. 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select SUBWOOFER ON or SUBWOOFER OFF) 5 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • Adjustment cannot be performed during a call. • Pressing t returns to the previous Sound menu mode. • If no operation is performed for 60 seconds, Sound menu mode is canceled. • You can access the Sound menu mode directly by pressing BASS when BASS ENGIN is set to OFF. Refer to "Setting BASS ENGINE SQ ON/ OFF" on page 16. Equalizer Presets 10 typical equalizer settings are preset at the factory for a variety of musical source material. USER settings are created in the 9BAND P-EQ mode. USER FLAT (Initial setting) POPS ROCK NEWS JAZZ ELEC DANCE HIP HOP EASY LIS COUNTRY CLASSICAL Note • The 9-Band, Parametric EQ is used to create the EQ PRESETS settings. 15-EN