Alpine CDE-W235BT Owner's Manual (english) - Page 21

BLUETOOTH SETUP The following steps 1 to 5 are common to the various BLUETOOTH functions. For details, refer to each individual function. Note • Set "HFP" or "AUDIO" to ON, and then perform BLUETOOTH SETUP operation. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 21. 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select "BLUETOOTH", and then press ENTER. The BLUETOOTH setup mode is activated. Note • The BLUETOOTH setup mode can also be activated by pressing and holding f for at least 2 seconds. 3 Turn the Rotary encoder to select the desired items and then press ENTER. BLUETOOTH: BT IN*1  PAIRED DEV  VISIBLE M*1  SEARCH DEV*1  CALL SOUND*2  SENDER ID*2  PB UPDATE*2  PB ORDER*2  AUTO ANS*2  SEV NAME*2  SPEAKER SL*2  FW VERSION  FW UPDATE*1 *1 The items are not displayed during a phone call. *2 The items are not displayed if "HFP" is set to OFF. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 21. 4 Turn the Rotary encoder to change the settings. 5 Press and hold AUDIOSETUP for at least 2 seconds. The SETUP mode is canceled. Notes • Press  to return to the previous mode. • Pressing and holding  for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. Setting the BLUETOOTH Connection (BT IN) With BLUETOOTH technology, you can place a hands-free call by a BLUETOOTH-equipped mobile phone. Audio information of a BLUETOOTH compatible mobile phone, a portable audio player, etc., is controllable/playable wirelessly from this unit.  Setting item: BT IN  Further setting items: HFP / AUDIO Setting contents: OFF / ON (Initial setting) Hands-Free Phone setting (HFP) ON: Select when you want to pair your BLUETOOTH compatible phone with this unit. OFF: Hands-Free Phone function is not used. Note • When HFP is set to OFF, the indicators related to Hands-free phone (c battery quantity, i signal strength and h message) will not be displayed. BLUETOOTH Audio setting (AUDIO) ON: Select when you want to use BLUETOOTH Audio function. OFF: BLUETOOTH Audio function is not used. Setting the BLUETOOTH Device Select one of 3 connected BLUETOOTH compatible devices that you previously registered.  Setting item: PAIRED DEV 1 Turn the Rotary encoder to select a BLUETOOTH compatible device you want to use (you want to change connection), and then press ENTER. 2 Turn the Rotary encoder to select "CONNECT" to connect the selected device. The connected device is marked with "l". Select "DISCONNECT" to disconnect this device. Select "CLEAR" when you want to clear the device from the device list. Notes • If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the  indicator lights up, then the display returns to the SETUP screen. • If a mobile phone is connected to this unit successfully, the c indicator lights up to show the battery quantity of the connected mobile phone. The j indicator lights up when the battery quantity is in middle level, and it blinks in low level. • Indicator i (Signal Strength): The indicator will display the current signal strength of mobile phone. The indicator blinks when the signal of the connected mobile phone is weak. • Depending on the connected mobile phone, the c (battery quantity), i (signal strength) and h (message) indicators may not be displayed. • If all the 3 positions have been registered, you cannot register the 4th device. To register another device, you need to delete one of the devices from position 1 to 3 first. 21-EN