Alpine CDE-W235BT Owner's Manual (english) - Page 27

iPod/iPhone optional - change time

Page 27 highlights

Flash Memory Connection (optional) Connect Flash Memory 1 Open the cover of the USB Port. 2 Connect the Flash Memory directly to the USB Port, or via the USB cable. This unit USB Connection Terminal iPod/iPhone (optional) Preset buttons (1 through 3) /REPEAT 4 Preset buttons (4 through 6) Flash Memory (sold separately) or Flash Memory (sold separately) Cable (sold separately) Remove Flash Memory 1 Carefully, pull out the Flash Memory Device from the USB cable or the USB Port. 2 Close the cover of the USB Port. Notes • Change to a source other than the Flash Memory mode, and then remove the Flash Memory Device. If Flash Memory is removed in the Flash Memory mode, data may be damaged. • When removing Flash Memory, pull it out straight. • If sound is not output or Flash Memory is not recognized even when connected, remove the Flash Memory Device once, and then connect it again. • Route the USB cable away from other cables, etc. • After removing the Flash Memory, close the cover of the USB Port to prevent dust or foreign objects from entering and causing a malfunction.     ABC SKIP SOURCE/ /ENTER/OPTION Rotary encoder /SHUFFLE 5 Connecting an iPod/iPhone An iPod/iPhone can be connected to this unit by using the Interface cable for iPod (included with iPod). When an iPod/iPhone is connected to this unit, you can choose to control the iPod/iPhone using its own controls or by the head unit controls. For details, refer to "Setting the iPod Control" on page 28. These instructions refer to controlling the iPod/iPhone from this Head Unit (HU) only. Make sure iPod Control is set to HU (HEAD UNIT) MODE. Refer to "Setting the iPod Control" on page 28. Refer to the iPod/iPhone manual for operations using the iPod/iPhone. This unit USB Connection Terminal About MP3/WMA File of Flash Memory Playing back MP3/WMA MP3/WMA files are prepared, and then stored to a Flash Memory Device. This unit can recognize at most 100 folders and 100 files per folder stored in Flash Memory. Playback may not be performed if a Flash Memory Device exceeds the limitations described above. Do not make a file's playback time more than 1 hour. Media supported This device can play back Flash Memory. Corresponding File Systems This device supports FAT 12/16/32 for Flash Memory device. iPod/iPhone (sold separately) Included with iPod/iPhone 27-EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

27
-EN
Flash Memory Connection (optional)
1
Open the cover of the USB Port.
2
Connect the Flash Memory directly to the USB Port, or via
the USB cable.
1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed in the
Flash Memory mode, data may be damaged.
When removing Flash Memory, pull it out straight.
If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
Route the USB cable away from other cables, etc.
After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
About MP3/WMA File of Flash Memory
Playing back MP3/WMA
MP3/WMA files are prepared, and then stored to a Flash Memory
Device. This unit can recognize at most 100 folders and 100 files per
folder stored in Flash Memory. Playback may not be performed if a Flash
Memory Device exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back Flash Memory.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory device.
Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to “Setting the
iPod Control” on page 28.
These instructions refer to controlling the iPod/iPhone from this Head
Unit (HU) only. Make sure iPod Control is set to HU (HEAD UNIT)
MODE. Refer to “Setting the iPod Control” on page 28. Refer to the
iPod/iPhone manual for operations using the iPod/iPhone.
Connect Flash Memory
Remove Flash Memory
USB Connection Terminal
This unit
Flash Memory
(sold separately)
or
Flash Memory
(sold separately)
Cable (sold
separately)
iPod/iPhone (optional)
SOURCE/
/REPEAT 4
/SHUFFLE 5
/ENTER/OPTION
ABC SKIP
Rotary encoder
Preset buttons
(1 through 3)
Preset buttons
(4 through 6)
USB Connection Terminal
This unit
iPod/iPhone
(sold separately)
Included with iPod/iPhone