Alpine CDE-W235BT Owner's Manual (english) - Page 24

Answering a Call Incoming calls are announced by the received call ring tone and a displayed message (PHONE). Press ENTER or f. The call starts. Notes • When "AUTO ANS" is set to AT ANS ON, you can receive a call automatically. Refer to "Setting the Received Calls automatically (Auto Answer)" on page 23. • While calling, the source sound on the unit is muted. After calling, playback will resume. Hanging up the Telephone Press f. The call finishes. Note • You can also hang up the call by pressing and holding  for at least 2 seconds. Calling Call History is recorded for the last dialed/received/missed calls (80 records for each). There are various ways of making calls based on the "Calling". The following steps 1 to 5 are common to the various ways of making these calls. For details, refer to each individual category for making calls. 1 Press f. The outgoing method list is displayed. 2 Turn the Rotary encoder to select the outgoing mode. Setting contents: VOICE DIAL / DIALED / RECEIVED / MISSED / PHONE BOOK VOICE DIAL: Voice dial operation DIALED: Dialed history RECEIVED: Received history MISSED: Missed incoming history PHONE BOOK: Mobile phone book 3 Press ENTER. The outgoing mode is activated, and each mode list is displayed. Note • It may take some time for the list to be displayed, and also directly after connection, the list may not be brought up to date. 4 Turn the Rotary encoder to select a name or a telephone number from the list. Note • You can use Phone book alphabet search function to search a name or number from Phone Book. For details, refer to "Phone book alphabet search function" on page 25. 5 Press ENTER. The selected telephone will be called. If one name has several numbers registered in the telephone book, press ENTER after selecting the name*, and then turn the Rotary encoder to choose the desired number and press ENTER, the telephone will be called. Press and hold ENTER for at least 2 seconds after selecting the name, the default number of the name will be called. Depending on the connected mobile phone, this function may not be performed. * If the name cannot be recognized, default number will be displayed. Notes • Press  to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. • The names registered in the telephone book are displayed. If the name is not registered, a number is displayed. If both name and number cannot be displayed, "ID UNSENT" will be displayed. • If you place a call directly from the paired mobile phone, the phone number is not displayed, you cannot redial from the unit in this case. Voice Dial Operation You can make a call using voice commands.  Setting item: VOICE DIAL When the speak mode is activated and "SPEAK" is displayed, say the telephone number*, name* you want to call into the microphone. * This message depends on the voice tag prestored in the mobile phone. Notes • You can perform this operation only when a voice dial compatible mobile phone is connected. If the mobile phone is not compatible with the voice dial, "NO SUPPORT" is displayed for 2 seconds. • The Voice Dial function performance depends on the recognition range of the mobile phone and mounting location of the microphone. Please pay attention when the microphone is mounted. • Voice dial operation depends on the function of the mobile phone. For details, refer to the Owner's Manual of the mobile phone. • If a called person that you say is not found, "NO CALL" is displayed for 2 seconds. Redialing a Number In Outgoing History Previously dialed telephone numbers are stored in dialed calls history. You can redial a number by searching from dialed calls history.  Setting item: DIALED Dialing a Number In Incoming History Telephone numbers from received calls are stored in the Received List. You can redial these numbers by searching here.  Setting item: RECEIVED Dialing a Number In Incoming Missed Call History Telephone numbers for received calls that are missed, are stored in the Missed List. You can redial these numbers by searching here.  Setting item: MISSED 24-EN