Alpine PXE-H660 Owners Manual - Page 17
Put Mic Pos 1 Press C - noise
UPC - 793276310286
View all Alpine PXE-H660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SETUP PROCEDURE 11. "REM CONTROL PRESS C" At this point, the PXE-H660 has optimized the input from the factory sound sytem. Next, the unit will use the included microphone to automatically tune the aftermarket sound system. Point the remote control at the PXE-H660's external remote eye. There is an insulator tab under the remote battery that needs to be removed before use. Press "C" on the remote control to continue. 12. "PUT MIC POS 1 PRESS C " Prepare to run the calibration test. Position the Mic in location 1 and exit the vehicle. Close all windows, doors, and the trunk. The car must be a noise free environment. Outside noises will negatively affect the tuning process and may generate an error code. Point the remote control at the PXE-H660's external remote eye. Press "C" on the remote control to continue. The MultEQ LED will be illuminated steady green while measuring position 1. When the MultEQ LED starts to blink slowly again, Position 1 measurement is complete; continue to the next step. 17