Alpine PXE-H660 Owners Manual - Page 23
Optional Settings, Parametric Equalizer - tuning
UPC - 793276310286
View all Alpine PXE-H660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
OPTIONAL SETTINGS Introduction The PXE-H660's automatic setup process is now complete. If you wish to further tune the system's sound quality, follow the steps below. Each output of the PXE-H660 has a 3-Band, parametric equalizer, up to 10 ms of time correction and customizable crossover points for High-pass, Low-pass and Subwoofer. Follow the procedures below to customize the Parametric EQ, Time Delay and Crossover. Use the same procedure described below, for each of the channels being modified. Pressing "ENTER" gets you into the program screen mode, allowing changes to current values. Use "SAVE SETTINGS" to permanently store these changes into non-volatile memory. PARAMETRIC EQUALIZER The Equalizer uses 3 Bands for each of the 7 channels to customize the tone of the music. Each Source Input to the PXE-H660 has its own EQ. Each of the Bands (Bass, Mid and Treble) is adjusted in a similar manner. The following steps use the Bass Band as an example. Use the same steps to make changes to the Mid and Treble Bands as well. Equalizer 1. Press MODE twice to enter Custom tuning. 2. Press u to get "PRESET 1" in the display. 23