Alpine PXE-H660 Owners Manual - Page 18

ERROR! CABIN NOISE-NO MIC - Speaker detection Error

Get Alpine PXE-H660 PDF manuals and user guides
UPC - 793276310286
View all Alpine PXE-H660 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

SETUP PROCEDURE 13. "ERROR! CABIN NOISE-NO MIC" - Speaker detection Error If the PXE-H660 displays this error display on the LCD and the MultEQ LED will blink quickly. Troubleshoot the system by making sure that nothing has become disconnected or turned off and the MIC is plugged in. Also make sure the vehicle is in a noise free environment. Excessive background noise can cause issues with the process. Press the "C" button on the remote once the issue has been corrected. The MultEQ LED blinks slowly again. Repeat Step 12 above. 14. "PUT MIC POS2 PRESS C" Reposition the microphone to the secondary position in the vehicle. When ready, exit the vehicle. Press "C" on the remote control to continue. The MultEQ LED will be illuminated steady green while measuring position 2. When the MultEQ LED starts to blink slowly again, Position 2 measurement is complete; continue to the MultEQ™ next step. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
18
13. "ERROR! CABIN NOISE-NO MIC" - Speaker detection Error
If the PXE-H660 displays this error display on the LCD and the MultEQ
LED will
blink quickly. Troubleshoot the system by making sure that nothing has become dis-
connected or turned off and the MIC is plugged in. Also make sure the vehicle is in a
noise free environment. Excessive background noise can cause issues with the process.
Press the "C" button on the remote once the issue has been corrected. The MultEQ
LED blinks slowly again. Repeat Step 12 above.
14. "PUT MIC POS2 PRESS C"
Reposition the microphone to the secondary position in the vehicle. When ready, exit
the vehicle. Press "C" on the remote control to continue. The MultEQ
LED will be
illuminated steady green while measuring position 2.
When the MultEQ
LED starts
to blink slowly again, Position 2 measurement is complete; continue to the MultEQ
™
next step.
SETUP PROCEDURE