Alpine PXE-H660 Owners Manual - Page 31
Return, Scroll Up, Scroll
UPC - 793276310286
View all Alpine PXE-H660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Crossover settings 5. FRONT 1 is displayed. Use the q or p button to choose a channel. In this example FRONT 2 is used. The following FRONT 2 adjustment procedures will be similar in nature to adjustments for the other channels. To make adjustments to the other chan- nels just substitute FRONT 1, REAR, or SUBWOOFER, for FRONT 2. The proce- dure is the same with only the parameters slightly different, as shown at the end of this section. User can also use the t button to return to the previous level with CROSS- OVER or TIME DELAY selections. Scroll Up Scroll Down Return 6. Once the channel has been selected, Press ENTER to begin making the adjustment. 31
31
5.
FRONT 1 is displayed.
Use the
q
or
p
button to choose a channel. In this example
FRONT 2 is used. The following FRONT 2 adjustment procedures will be similar in
nature to adjustments for the other channels. To make adjustments to the other chan-
nels just substitute FRONT 1, REAR, or SUBWOOFER,
for FRONT 2. The proce
-
dure is the same with only the parameters slightly different, as shown at the end of this
section. User can also use the
t
button to return to the previous level with CROSS
-
OVER or TIME DELAY selections.
6.
Once the channel has been selected, Press ENTER to begin making the adjustment.
CROSSOVER SETTINGS
Return
Scroll Up
Scroll
Down