Ariens Pro Track 28 Owners Manual - Page 16
Drift Cutters, Track Angle
View all Ariens Pro Track 28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Drift Cutters (Figure 14) Drift cutters break up snow drifts that are taller than the auger housing and direct the snow into the auger. Store the drift cutters on the auger housing when not in use. Install them as shown below so they are taller than the snow to be cleared. 1 Track Angle (926041, 042, 043) (Figure 15) The track angle can be adjusted to position the auger housing for level clearing, deep cutting or transport. Squeeze the handlebar trigger and press down on the handlebars to move the auger housing into an up position. Release the trigger to hold the position. Lift up on the handlebars and squeeze and release the handlebar trigger to move the auger housing into a down position. Normal 2 OS7110 1. Stored Position 2. Operating Position Figure 14 Transport Deep Cutting Figure 15 OS7111 GB - 16