Ariens Pro Track 28 Owners Manual - Page 20

MAINTENANCE Ariens Dealers will provide any service or adjustments which may be required to keep your unit operating at peak efficiency. Should engine service be required, contact an Ariens dealer or an authorized engine manufacturer's service center. WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. SERVICE POSITION (Figure 16) WARNING: Before tipping unit up onto housing, remove fuel so no spills will occur and remove battery (if equipped). Ensure unit is secure and will not tip over during maintenance. 1. Shut off engine, remove key, disconnect spark plug wire and allow unit to cool completely. 2. Close fuel shut-off valve (see Gasoline on page 17). 3. Drain fuel tank and fuel system (see Engine Manual for complete instructions). 4. Place unit on a flat level surface. Tip unit forward onto front of auger housing for service. IMPORTANT: Ensure unit is secure and will not tip over. Strap and clamp onto bench if needed. Service Position Figure 16 OS7121 GB - 20