Asus K8N-DL User Guide - Page 79

Access Mode [Auto] Allows selection of the sector addressing mode. The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the Primary IDE Master to [Manual] to manually enter the drive information. Configuration options: [CHS] [LBA] [Large] [Auto] Manually detecting an IDE drive To manually enter the drive information, set the Primary IDE Master item to [Manual], and the Access Mode item to [CHS]. Main Phoenix-Award BIOS CMOS Setup Utility Primary IDE Master PIO Mode UDMA Mode [Auto] [Auto] Primary IDE Master Access Mode [Manual] [CHS] Capacity 0 MB Select Menu Item Specific Help Set a PIO mode for the IDE device. Mode0 through 4 successive increase in performance. Cylinder Head Precomp Landing Zone Sector Transfer Mode S.M.A.R.T Status 0 0 0 0 0 None None F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. To enter the number of cylinder, head, precomp, landing zone, sector per track for the drive, highlight an item, key-in the value that you obtained from the drive label or documentation, then press . To enter a value, you may also highlight the item, then press to display a pop-up menu. Type in the value indicated in the drive label or documentation, the press . Capacity Displays the auto-detected hard disk capacity. Cylinder Shows the number of the hard disk cylinders. ASUS K8N-DL 4-17