Asus RS100-E5 User Guide - Page 32
Connect the Serial ATA signal cable, and ATX power connectors. Use
UPC - 610839665518
View all Asus RS100-E5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Connect the Serial ATA signal cable and ATX power connectors. Use the L-type Serial ATA connector to connect to the hard drive. SATA L-type connector ATX power connector SATA signal cable 3. Place the Serial ATA drive into the drive bay matching the four screw holes with the holes on the disk drive. 4. Secure the hard drive with four screws. 2-14 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-14
2.
Connect the Serial ATA signal cable
and ATX power connectors. Use
the L-type Serial ATA connector to
connect to the hard drive.
SATA L-type
connector
3.
Place the Serial ATA drive into the
drive bay matching the four screw
holes with the holes on the disk
drive.
ATX power connector
SATA signal cable
4.
Secure the hard drive with four
screws.