Home » Asus Manuals » Desktops » Asus RS100-E5 » Manual Viewer

Asus RS100-E5 User Guide - Page 68

ASUS CrashFree BIOS 3 utility

UPC - 610839665518

Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

5.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the USB flash disk, or the floppy disk that contains the updated BIOS file. • Prepare a USB flash disk or a floppy disk containing the updated motherboard BIOS before using this utility. • Ensure that you rename the original or updated BIOS file in the floppy disk or the USB flash disk. • Visit ASUS website (www.asus.com) to download the latest BIOS file. Recovering the BIOS from the USB flash disk To recover the BIOS from the USB flash disk: 1. Insert the USB flash disk that contains BIOS file to the USB port. 2. Turn on the system. 3. The utility will automatically checks the devices for the BIOS file when found, the utility reads the BIOS file and starts flashing the corrupted BIOS file. 4. Restart the system after the utility completes the updating process. • Only the USB flash disk with FAT 32/16 format and single partition can support ASUS CrashFree BIOS 3. The device size should be smaller than 8GB. • DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Recovering the BIOS from a floppy disk To recover the BIOS from a floppy disk: 1. Turn on the system. 2. Insert the floppy disk with the original or updated BIOS file to the floppy disk drive. 3. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... 5-6 Chapter 5: BIOS setup

Section	Page
Contents	3
Notices	7
Safety information	8
About this guide	9
Chapter 1: Product introduction	11
1.1 System package contents	12
1.2 Serial number label	12
1.3 System specifications	13
1.4 Front panel features	15
1.5 Rear panel features	15
1.6 Internal features	16
1.7 LED information	17
1.7.1 Front panel LEDs	17
1.7.2 LAN (RJ-45) LEDs	17
Chapter 2: Hardware setup	19
2.1 Chassis cover	20
2.1.1 Removing the cover	20
2.1.2 Installing the cover	21
2.2 Motherboard information	23
2.3 Central Processing Unit (CPU)	24
2.3.1 Installing the CPU	24
2.3.2 Installing the CPU heatsink	26
2.4 System memory	28
2.4.1 Overview	28
2.4.2 Memory configurations	28
2.4.3 Installing a DIMM	29
2.4.4 Removing a DIMM	29
2.5 Replaceable components	30
2.5.1 Installing the chassis fans	30
2.5.2 Installing Serial ATA drives	31
2.5.3 Installing optical disk drive (ODD)	35
Chapter 3: Installation options	37
3.1 Rackmount rail kit items	38
3.1.1 Attaching the rack ears	38
3.1.2 Attaching the rails to the rack	39
3.2 Rackmount bracket kit (Optional)	43
3.2.1 Attaching the long rack ears	43
3.2.2 Attaching the server to the rack cabinet	44
3.3 Front panel cover kit (Optional)	45
Chapter 4: Motherboard information	47
4.1 Motherboard overview	48
Layout contents	49
4.2 Jumpers	50
4.3 Connectors	53
4.3.1 Rear panel connectors	53
4.3.2 Internal connectors	54
Chapter 5: BIOS setup	63
5.1 Managing and updating your BIOS	64
5.1.1 Creating a bootable floppy disk	64
5.1.2 AFUDOS utility	65
5.1.3 ASUS CrashFree BIOS 3 utility	68
5.2 BIOS setup program	70
5.2.1 BIOS menu screen	71
5.2.2 Menu bar	71
5.2.3 Navigation keys	71
5.2.4 Menu items	72
5.2.5 Sub-menu items	72
5.2.6 Configuration fields	72
5.2.7 Pop-up window	72
5.2.8 Scroll bar	72
5.2.9 General help	72
5.3 Main menu	73
5.3.1 System Time [xx:xx:xx]	73
5.3.2 System Date [Day xx/xx/xxxx]	73
5.3.3 Legacy Diskette A [Disabled]	73
5.3.4 Primary IDE Master/Slave, SATA1-4	74
5.3.5 IDE Configuration	75
5.3.6 System Information	77
5.4 Advanced menu	78
5.4.1 USB Configuration	78
5.4.2 Remote Access Configuration	79
5.4.3 Trusted Computing	80
5.4.4 MPS Configuration	80
5.4.5 CPU Configuration	81
5.4.6 Chipset Configuration	82
5.4.7 Onboard Devices Configuration	83
5.4.8 PCI PnP	84
5.5 Power Configuration	86
5.5.1 APM Configuration	87
5.5.2 Hardware Monitor	88
5.6 Boot menu	90
5.6.1 Boot Device Priority	90
5.6.2 Boot Settings Configuration	91
5.6.3 Security	92
5.7 Exit menu	94
Chapter 6: RAID configuration	95
6.1 RAID configurations	96
6.1.1 RAID definitions	96
6.1.2 Installing Serial ATA hard disks	97
6.1.3 Setting the RAID item in BIOS	97
6.1.4 RAID configuration utility	97
6.2 Intel® Matrix Storage Manager Option ROM Utility	98
6.2.1 Creating a RAID 0 set (striped)	99
6.2.2 Creating a RAID 1 set (mirrored)	100
6.2.3 Deleting a RAID set	101
6.2.4 Resetting Disks to Non-RAID	102
6.2.5 Exiting the Intel® Matrix Storage Manager utility	102
6.2.6 Rebuilding the RAID	103
6.2.7 Setting the Boot array in the BIOS Setup Utility	104
6.3 LSI Software RAID Configuration Utility	105
6.3.1 Creating a RAID 0 or RAID 1 set	106
6.3.2 Initializing the virtual drives	112
6.3.3 Rebuilding failed drives	117
6.3.4 Checking the drives for data consistency	119
6.3.5 Deleting a RAID configuration	122
6.3.6 Selecting the boot drive from a RAID set	123
6.3.7 Enabling the WriteCache	124
Chapter 7: Driver installation	125
7.1 RAID driver installation	126
7.1.1 Creating a RAID driver disk	126
7.1.2 Installing the RAID controller driver	128
7.2 LAN driver installation	138
7.2.1 Windows® Server	138
7.2.2 Red Hat® Enterprise	139
7.3 VGA driver installation	140
7.3.1 Windows® Server	140
7.3.2 Red Hat enterprise	141
7.4 Management applications and utilities installation	142
7.4.1 Running the support CD	142
7.4.2 Drivers menu	142
7.4.3 Management Software menu	143
7.4.4 Utilities menu	143
7.4.5 Contact information	144
Appendix: Reference information	145
A.1 Intel® EM64T	146
Using the Intel® EM64T feature	146
A.2 Enhanced Intel SpeedStep® Technology (EIST)	146
A.2.1 System requirements	146