Asus RS100-E5 User Guide - Page 58
Serial port connector 10-1 pin COM2, CPU and system fan connectors 4-pin CPU_FAN1, FRNT_FAN1,
UPC - 610839665518
View all Asus RS100-E5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
6. Serial port connector (10-1 pin COM2) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. The serial port module is purchased separately. ® P5BV-M/RS100-E5 COM2 PIN 1 P5BV-M/RS100-E5 COM2 Port Connector 7. CPU and system fan connectors (4-pin CPU_FAN1, FRNT_FAN1, REAR_FAN1) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. CPU_FAN1 GND FANPWR2 FAN PWM ® P5BV-M/RS100-E5 FRNT_FAN1 FAN PWM FANPWR2 GND GND FANPWR2 FAN PWM P5BV-M/RS100-E5 Fan Connectors REAR_FAN1 Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! 4-12 Chapter 4: Motherboard Information