Asus Terminator K7 E732 MANUAL TERMINATOR K7 English V1.0 - Page 104
Wake onUSB for S3/S4/S5 State [Disbled]
View all Asus Terminator K7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
PWR Up On External Modem Act [Disabled] This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. NOTE: The computer cannot receive or transmit data until the computer and applications are fully running. Thus connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that will also cause the system to power on. Configuration options: [Disabled] [Enabled] Wake On LAN or PCI Modem [Disabled] Wake-On-LAN/PCI Modem allows your computer to be booted from another computer via a network by sending a wake-up frame or signal. Configuration options: [Disabled] [Enabled] IMPORTANT: This feature requires an optional network interface with Wake-OnLAN and an ATX power supply with at least 720mA +5V standby power. Wake onUSB for S3/S4/S5 State [Disbled] This allows you to select whether or not to wake up from S3/S4/S5 by USB device. When selecting [Enable], make sure that jumper JP1A is placed at 2-3 and the +5VSB standby power is larger than 2.0A. Otherwise, STR will not work properly. Automatic Power Up [Disabled] This allows an unattended or automatic system power up. You may configure your system to power up at a certain time of the day by selecting [Everyday] or at a certain time and day by selecting [By Date]. Automatic Power Up does not work if the system is powered down by operating systems with ACPI feature, such as Windows 98. Configuration options: [Disabled] [Everyday] [By Date] 104 Chapter 5: BIOS Information