Asus Terminator K7 E732 MANUAL TERMINATOR K7 English V1.0 - Page 20
the picture in step 1. - cpu
View all Asus Terminator K7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2.3 Install a CPU 3. Take note of the notched corners on the CPU picture below. 4. Position the CPU above the socket such that its notched or marked corners match those of the notched corners of the socket. 5. Carefully insert the CPU into the socket until it fits in place. 6. Push down the lever to secure the CPU. The lever clicks in place indicating that the socket is locked. Notched Corners Heatsink Fan Notched Corner Socket Lever 7. Connect the CPU fan cable to the 3-pin CPU_FAN connector on the motherboard. Refer to the picture in step 1. WARNING! The CPU fits only in one orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU. If the CPU does not fit completely, check its orientation or check for bent pins. 20 Chapter 2: Basic Installation