Asus Terminator K7 E732 MANUAL TERMINATOR K7 English V1.0 - Page 91

Chip Configuration

Get Asus Terminator K7 PDF manuals and user guides View all Asus Terminator K7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

5.5.1 Chip Configuration Onboard PCI IDE Enable [Both] You can select to enable the primary IDE channel, secondary IDE channel, both, or disable both channels. Configuration options: [Both] [Primary] [Secondary] [Disabled] Spread Spectrum Control [Enabled] Leave on default setting. Spread spectrum typically reduces system electromagnetic interference (EMI) by 8dB to 10dB. SDRAM Configuration [By SPD] Sets the optimal timings for SDRAM related fields, depending on the memory modules you are using. Default setting is [By SPD], which sets the subsequent 3 items by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter data, such as memory type, size, speed, voltage interface, and module banks. Configuration options: [User Define] [7ns(143MHz)] [8ns(125MHz)] [By SPD] SDRAM CAS Latency This controls the latency between the SDRAM read command and the time that the data actually becomes available. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. SDRAM RAS Precharge Time This controls the idle clocks after issuing a precharge command to the SDRAM. NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. ASUS Terminator K7 Barebone System 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
ASUS Terminator K7 Barebone System
91
5.5.1
Chip Configuration
Onboard PCI IDE Enable [Both]
You can select to enable the primary IDE channel, secondary IDE
channel, both, or disable both channels. Configuration options: [Both]
[Primary] [Secondary] [Disabled]
Spread Spectrum Control [Enabled]
Leave on default setting. Spread spectrum typically reduces system
electromagnetic interference (EMI) by 8dB to 10dB.
SDRAM Configuration [By SPD]
Sets the optimal timings for SDRAM related fields, depending on the
memory modules you are using. Default setting is [By SPD], which
sets the subsequent 3 items by reading the contents in the SPD (Serial
Presence Detect) device. The EEPROM on the memory module
stores critical parameter data, such as memory type, size, speed,
voltage interface, and module banks. Configuration options: [User
Define] [7ns(143MHz)] [8ns(125MHz)] [By SPD]
SDRAM CAS Latency
This controls the latency between the SDRAM read command and the
time that the data actually becomes available.
NOTE:
This field will
only be adjustable when
SDRAM Configuration
is set to [User Define].
SDRAM RAS Precharge Time
This controls the idle clocks after issuing a precharge command to
the SDRAM.
NOTE:
This field will only be adjustable when
SDRAM
Configuration
is set to [User Define].