Asus Terminator K7 E732 MANUAL TERMINATOR K7 English V1.0 - Page 57

6. Internal Audio Connectors (4-1 pin CD_IN, MODEM) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector. It also allows the sharing of mono_in (such as a phone) and a mono_out (such as a speaker) between the audio and a voice modem card. A7VC CD (Black) MODEM Modem-In (to Modem) Ground Modem-Out (from Modem) ® Left Audio Channel Ground Right Audio Channel A7VC Internal Audio Connectors 7. ATX Power Supply Connector (20-pin block ATXPWR) This connector connects to an ATX power supply. The plug from the power supply fits in only one orientation because of the different hole sizes. Find the proper orientation and push down firmly making sure that the pins are aligned. IMPORTANT Make sure that the ATX power supply can supply at least 10mA on the +5-volt standby lead (+5VSB). You may experience difficulty in turning the system ON if the power supply cannot support the load. For Wake-On-LAN support, the ATX power supply must supply at least 720mA +5VSB. +5.0 Volts +5.0 Volts -5.0 Volts Ground Ground Ground Power Supply On Ground -12.0Volts +3.3Volts ATXPWR A7VC ATX12V COM COM +12V DC +12V DC ® A7VC ATX & Auxiliary Power Connectors +12.0Volts +5V Standby Power Good Ground +5.0 Volts Ground +5.0 Volts Ground +3.3 Volts +3.3 Volts ASUS Terminator K7 Barebone System 57