Asus Terminator K7 E732 MANUAL TERMINATOR K7 English V1.0 - Page 58
Floppy Disk Drive Connector 34-1 pin FLOPPY
View all Asus Terminator K7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
8. Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orientation when using ribbon cables with pin 5 plugged). A7VC FLOPPY ® A7VC Floppy Disk Drive Connector PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. 9. Wake-On-LAN Connector (3-pin WOL_CON) This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card. IMPORTANT: To use this feature, enable the Wake-On-LAN feature in BIOS (see 5.5.1 Power Up Control) and make sure that system has an ATX power supply with at least 720mA +5V standby power. A7VC IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power WOLCON ® +5 Volt Standby PME A7VC Wake-On-LAN Connector Ground 58 Chapter 3: Motherboard Information