BenQ DV3250 User Manual - Page 20

English Connecting the Power Cord 1. Connect the female end of the AC power cord to the AC input on the display. 2. As shown in the diagram, connect the male end to a wall power outlet. Power outlet Power Cord • The figure above shows the power cord connection. The shape of the physical power cord plug and socket will differ depending on the location where you purchased the display. • This product must be operated only from the type of power source indicated on the marking label (AC 100~240V 50/60 Hz). • If the display will not be used for a long period of time, it should be unplugged from the wall outlet. Initial Setup 1. Check to make sure that all connections to your display are correct and firm. 2. Press the Power button on the display. The display will turn on. The following First Turn On screen will appear. 3. Press the Volume or Volume buttons on the display to select a screen display language, and then press the Channel button on the display to go to the next step. 4. Press the Volume or Volume buttons on the display to select your country, and then press the Channel button on the display to go to the next step. 5. (Optional) If Others is selected in Country, press the Volume or Volume buttons on the display to select a TV broadcast standard. 6. Press the Channel button on the display to select Auto Installation and then press the INPUT button. The display will start searching for available channels and store them in the memory. This may take several minutes, depending on the available TV channels of your local TV system. 7. Press the MENU button on the display to close the menu. 12 Setting up Your Display