BenQ PG2401PT PG2401PT User Manual - Page 33

Picture optimization, Customizing the hot keys, Adjusting the display color, Adjustment, Display

Get BenQ PG2401PT PDF manuals and user guides View all BenQ PG2401PT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Picture optimization The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the Auto Adjustment function. Go to Display and Auto Adjustment to optimize the currently displayed image to the screen. When you connect a digital input signal using a digital (DVI, DP, mini DP, or HDMI) cable to your monitor, the Auto Adjustment function will be disabled, because the monitor will automatically display the best image. Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor when you use the Auto Adjustment function. If you wish, you can always adjust the screen geometric settings manually using geometry menu items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can use to check for screen color, grayscale and line gradient display. 1. Run the test program auto.exe from DVD-ROM. You could also use any other image, such as the desktop of your operating system. However, we recommend that you use auto.exe. As you run auto.exe, a test pattern displays. 2. Press any of the control keys to bring up the hot key menu. Select Menu to enter the main menu. 3. Go to Display and Auto Adjustment. 4. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select Pixel Clock and adjust the monitor until the noise disappears. 5. If you notice a horizontal noise, select Phase and adjust the monitor until the noise disappears. Customizing the hot keys The left 4 control keys (also called custom keys) perform as hot keys to provide direct access to pre-defined functions. You can change the default setting and designate different functions for these keys. 1. Press any of the control keys to bring up the hot key menu, and press Menu to access the main menu. 2. Go to System. 3. Select the custom key you want to change. 4. In the sub menu, select a function that can be accessed by this key. A pop-up message will appear, showing that the setup is complete. Adjusting the display color To adjust the display color, you can do one of the following: • Apply the standard color settings from Color Adjustment > Color Mode. • Change the display and color settings manually from the OSD menu. Settings you might want to change are: - Color Temp. (see page 39) - Gamma (see page 40) - Color Gamut (see page 40) How to adjust your monitor 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
33
How to adjust your monitor
Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the
Auto
Adjustment
function. Go to
Display
and
Auto Adjustment
to optimize the currently
displayed image to the screen.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you
can use to check for screen color, grayscale and line gradient display.
1.
Run the test program auto.exe from DVD-ROM. You could also use any other image, such
as the desktop of your operating system. However, we recommend that you use auto.exe.
As you run auto.exe, a test pattern displays.
2.
Press any of the control keys to bring up the hot key menu. Select
Menu
to enter the main
menu.
3.
Go to
Display
and
Auto Adjustment
.
4.
If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select
Pixel
Clock
and adjust the monitor until the noise disappears.
5.
If you notice a horizontal noise, select
Phase
and adjust the monitor until the noise
disappears.
Customizing the hot keys
The left 4 control keys (also called custom keys) perform as hot keys to provide direct access
to pre-defined functions. You can change the default setting and designate different functions
for these keys.
1.
Press any of the control keys to bring up the hot key menu, and press
Menu
to access the
main menu.
2.
Go to
System
.
3.
Select the custom key you want to change.
4.
In the sub menu, select a function that can be accessed by this key. A pop-up message will
appear, showing that the setup is complete.
Adjusting the display color
To adjust the display color, you can do one of the following:
• Apply the standard color settings from
Color Adjustment
>
Color Mode
.
• Change the display and color settings manually from the OSD menu. Settings you might want
to change are:
-
Color Temp.
(see page 39)
-
Gamma
(see page 40)
-
Color Gamut
(see page 40)
When you connect a digital input signal using a digital (DVI, DP, mini DP, or HDMI) cable to your monitor, the
Auto Adjustment
function will be disabled, because the monitor will automatically display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the monitor
when you use the
Auto Adjustment
function.