Biostar M7VKQ M7VKQ user's manual - Page 61
Doze Mode/ Suspend Mode, Suspend Mode, ACPI Suspend Type, PM Control by APM, Video Off Option
View all Biostar M7VKQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 2 BIOS Setup Doze Mode/ Suspend Mode The item allows you to select the suspend type under ACPI operating system. The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min. Suspend Mode When enabled and when after the set time of system inactivity, all devices except the CPU will be shut off. The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 6 Min, 8 Min, 10 Min, 20 Min, 30 Min, 40 Min, and 1Hour. ACPI Suspend Type The item allows you to select the suspend type under the ACPI operating system. The Choices: S1 (POS) (default) Power on Suspend S3 (STR) Suspend to RAM PM Control by APM The Choices: No Yes (default) System BIOS will ignore APM when power Management is on. System Bios will wait for APM's prompt before it enters any PM mode. Video Off Option This field determines when to activate the video off feature for monitor power management. The Choices: Suspend→Off (default), Always on, All Modes→Off. Video Off Method This option determines the manner in which the monitor is goes blank. The Choices: V/H SYNC+Blank (default) This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video 2-24