Biostar M7VKQ M7VKQ user's manual - Page 63
PCI Master, RTC Alarm Resume, Primary INTR, Wake Up On LAN/Ring
View all Biostar M7VKQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 2 BIOS Setup PCI Master When set to On, any event occurring at PCI will awaken a system which has been powered down. The Choices: OFF (default), ON. PowerOn by PCI Card When you select Enabled, a PME signal from PCI card returns the system to Full ON state. The Choices: Disabled (default), Enabled. Wake Up On LAN/Ring To use this function, you need a LAN add-on card which support power on function. It should also support the wake-up on LAN jump. Disabled (default) Wake up on LAN/Ring not supported Enabled Wake up on LAN/Ring supported Modem Ring Resume To use this function, you need a LAN add-on card which support power on function. It should also support the wake-up on LAN jump. The Choices: Disabled (default) Wake up on LAN/Ring not supported. Enabled Wake up on LAN/Ring supported. RTC Alarm Resume When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode. The Choices: Disabled (default), Enabled. Date (of Month) You can choose which month the system will boot up. This field is only configurable when "RTC Resume" is set to "Enabled". Resume Time (hh: mm: ss) You can choose the hour, minute and second the system will boot up. This field is only configurable when "RTC Resume" is set to "Enabled". Primary INTR When set to ON (default), any event occurring at Primary INTR will 2-26