Bissell Carpet Cleaners User Guide - Page 10

Cleaning with Hose & Tool, Cleaning with CleanShot

Page 10 highlights

Cleaning with Hose & Tool 1 Lift the Accessory Hose Door on top of Foot on the front of the machine. The door flips toward the machine to open. - Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brush Roll continues to rotate when in the upright position. - Brush Roll continues to turn while product is turned ON and handle is in upright position. To avoid damage to carpet, rugs, furniture, and flooring, avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted stairs during tool use. - The Brush Roll remains on while cleaning with the hose and tool. Do not allow cleaner to sit in one location for an extended period of time, as damage to floor can result. 2 Insert the hose and snap into place. Be sure the red hose release clip is facing out, away from machine. 3 Attach the tool to the end of the hose. (Tools may vary by model.) Press the Power Button to turn machine ON. 4 Press the Spray Trigger to spray the soiled area, then slowly move tool back and forth over the area. Release the trigger to suck up the dirty solution. Work in small sections until the area is clean. When finished cleaning, turn the machine ON to suction up warm clean water to rinse the inside of the hose and tool. Detach the hose and tool and close the Accessory Hose Door. Let the hose and tool air dry before storing. NOTE: If using the Deep Reach Tool or Pet Stain Tool be sure the needles of the tool are pressed down into the carpet so the spray gets into the carpet fibers. Cleaning with CleanShot® 1 Press the CleanShot Button with your foot. The window of the button will be green and show an "I" symbol when it is on. 10 www.BISSELL.com 2 Spray will continue until you turn it off. To turn CleanShot off, press the button with your foot. The window of the button will be red and show an "O" symbol when it is off. Completely cover the stain with CleanShot spray. Allow the stain to soak. To extract, maneuver the Foot of the machine over the stain to scrub and remove. Continue to clean over the area multiple times for extra scrubbing and suction.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

www.BISSELL.com
10
2
Keep hair, loose clothing, fingers, and all parts of
body away from openings and moving parts. Brush
Roll continues to rotate when in the upright position.
Brush Roll continues to turn while product is
turned ON and handle is in upright position. To avoid
damage to carpet, rugs, furniture, and flooring, avoid
tipping cleaner or setting it on furniture, fringed area
rugs, or carpeted stairs during tool use.
The Brush Roll remains on while cleaning with
the hose and tool. Do not allow cleaner to sit in one
location for an extended period of time, as damage
to floor can result.
3
4
Insert the hose and
snap into place.
Be sure the red
hose release clip
is facing out, away
from machine.
Press the Spray Trigger to spray the soiled
area, then slowly move tool back and forth
over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the area
is clean.
When finished cleaning, turn the machine ON
to suction up warm clean water to rinse the
inside of the hose and tool. Detach the hose
and tool and close the Accessory Hose Door.
Let the hose and tool air dry before storing.
Attach the tool to the end of the hose.
(Tools may vary by model.) Press the
Power Button to turn machine ON.
1
Lift the Accessory
Hose Door on top
of Foot on the front
of the machine. The
door flips toward the
machine to open.
Spray will continue until you
turn it off. To turn CleanShot
off, press the button with
your foot. The window of the
button will be red and show
an “O” symbol when it is off.
1
2
Completely cover the
stain with CleanShot
spray. Allow the stain
to soak. To extract,
maneuver the Foot
of the machine over
the stain to scrub and
remove. Continue to
clean over the area
multiple times for extra
scrubbing and suction.
Cleaning with Hose & Tool
Cleaning with CleanShot
®
NOTE:
If using the
Deep Reach Tool
or
Pet Stain Tool
be sure the needles of the tool are
pressed down into the carpet so the spray gets into the carpet fibers.
Press the CleanShot
Button with your
foot. The window of
the button will be
green and show an “I”
symbol when it is on.