Bissell Carpet Cleaners User Guide - Page 17

Replacing the Belts & Brush Rolls (cont.) 7 If the flat belt is broken, 8 gently remove it. If it needs replacing for any reason, the gear belt should already be removed before removing the flat belt. Rotate the machine back to its side. Feed the new flat belt through the opening so that it wraps around the red pulley. Keep it wrapped on the red pulley and adjust the machine so it is laying on its back again. Use your thumb to stretch the flat belt back to wrap around the metal axle. 9 10 Resecure the Wheel and Belt Access Door: Slide the wheel up back into the slot and secure with the screw that was removed. Snap the Belt Access Door back down into place. NOTE: See Step 6 on page 15 for how to put the Brush Roll Cover and Nozzle back in place. NOTE: Other maintenance or service not included in this user guide should be performed by an authorized service representative. www.BISSELL.com 17