Bissell Carpet Cleaners User Guide - Page 14

Rinsing the Brush Roll & Nozzles

Get Bissell Carpet Cleaners PDF manuals and user guides View all Bissell Carpet Cleaners manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Rinsing the Brush Roll & Nozzles 1 2 Set your machine on the Rinse & Storage Tray and OPEN the Accessory Hose Door. Make sure the machine is not reclined. The machine should be in its upright position to prevent water from splashing. 3 Fill the Water Rinse Cup with fresh tap water to the fill line on the cup. 4 Fill the tray with water using the Water Cup. ONLY ADD WATER when using the tray. If the tray is over-filled, the water could splash out of the tray when the machine is turned ON. Turn the machine ON. This will begin to wash and rinse the Brush Rolls. After 6-8 seconds CLOSE the Accessory Hose Door to extract the water from the tray. After using the tray, clean any water that may have escaped the tray while in use. 14 www.BISSELL.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
www.BISSELL.com
14
1
2
Rinsing the Brush Roll & Nozzles
Fill the Water Rinse Cup with fresh tap
water to the fill line on the cup.
Set your machine on the Rinse & Storage
Tray and OPEN the Accessory Hose Door.
Make sure the machine is not reclined. The
machine should be in its upright position
to prevent water from splashing.
3
4
Turn the machine ON. This will begin to
wash and rinse the Brush Rolls. After
6-8 seconds CLOSE the Accessory Hose
Door to extract the water from the tray.
After using the tray, clean any water that
may have escaped the tray while in use.
Fill the tray with water using the Water
Cup. ONLY ADD WATER when using the
tray.
If the tray is over-filled, the water
could splash out of the tray when the
machine is turned ON.