Bissell Carpet Cleaners User Guide - Page 9
Cleaning Your Carpet
View all Bissell Carpet Cleaners manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Cleaning Your Carpet 1 2 Select cleaning mode: Max Clean - Provides a heavy cleaning for your dirtiest carpets. After cleaning, it's estimated the Plug into carpets will need 8 hours to dry. a properly grounded outlet. Deep Clean - Delivers a deep clean to your carpet. Express Clean - Provides a lighter clean with about a 30-minute dry time. Recommended Cleaning Pace: 12 inches per second. 3 4 Press the Power Button to turn the machine ON. To recline your machine for use, press the Recline Pedal with your foot. NOTICE: To prevent damage to Berber carpets, avoid repeated strokes in the same area. Express Clean Mode: 1. Press the Spray Trigger to apply solution while making 2 wet passes - 1 forward and 1 back. 2. Release the trigger. 3. Make 2 dry passes 1 forward, 1 back to suck up the dirty solution. (Do not hold down the trigger for this step.) Recommended Cleaning Pace: 12 inches per second Max Clean & Deep Clean Modes: 1. Press the Spray Trigger to apply solution while making 2 slow wet passes 1 forward and 1 back. 2. Release the trigger. 3. Make 2 slow dry passes 1 forward and 1 back to suck up the dirty solution. (Do not hold down the trigger for this step.) Antibacterial Cleaning (Deep Clean Mode Only) 1. Press the Spray Trigger to apply solution while making 3 slow wet passes - 1 forward, 1 back, and 1 forward again. 2. Release the trigger. 3. Make 1 slow dry pass back, to suck up the dirty solution. (Do not hold down the trigger for this step.) • Max Clean Mode is intended for your dirtiest carpeted areas. Please note that your carpets will need an estimated 8 hours to dry. To expedite the drying process, place a fan in the room or near the carpet. • In Express Clean Mode, the Dirty Water Tank will not get as full as when cleaning with Deep or Max Clean Mode. • It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times throughout your cleaning process. Room size and the speed at which you clean are both factors that affect how often the tank may need to be refilled and/or emptied. www.BISSELL.com 9