Bissell Carpet Cleaners User Guide - Page 8

Filling Your Clean Water Tank: For Future Use if selecting Antibacterial Formula with EasyFill 1 The Clean Water 2 3 Tank is at the top of the machine. Clean Water Tank (1 Gallon) Dirty Water Tank Lift the tank straight up to remove from the machine. Unscrew the cap from the tank. Add hot tap water to the water fill line. 4 5 After filling the tank with hot tap water, twist the yellow cap back onto the tank. Firmly insert the full-size formula bottle into the cap on the tank and squeeze until formula reaches the EasyFill line. With Trial-Size Antibacterial Formula: Pour into the clean tank up to the EasyFill line. Twist cap back on to tank. At the bottom of the Upper Handle, align the tank with the grooves and slide the tank into place. A few notes about filling the Clean Water Tank: • Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Antibacterial formula: Only fill your Clean Water Tank with the recommended amount of water and formula to achieve antibacterial benefits. NOTICE: BISSELL Antibacterial formula is only for BISSELL machines with EasyFill System. NOTICE: Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush may result in premature belt failure. 8 www.BISSELL.com