Bissell Carpet Cleaners User Guide - Page 12

Cleaning Area Rugs Regularly clean your high-traffic area rugs in Express Clean Mode: • Check the manufacturer's tag. • Select Express Clean Mode. • When cleaning area rugs, place the rug on a sealed surface to test for colorfastness in an inconspicuous area. Your cleaner should not be used on unsealed surfaces. • Important: Keep the Foot of the deep cleaner perpendicular to the rug's edge with each cleaning pass to prevent damage. • Recommended Cleaning Pace: 12 inches per second IMPORTANT: Please check manufacturer's tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique, or area rugs without a manufacturer's tag. Emptying the Dirty Water Tank WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 1 2 To release Dirty Water Tank, press the colored tank handle down and tilt the tank towards you. Pull the tank up and off the machine. For quick empty: Pull the Rubber Tab and tilt to pour. When closing the Rubber Tab, make sure all edges are sealed tight. For final clean and rinse: Unscrew the ring at the bottom of the tank. Gently remove and clean the Float Stack. Return the Float Stack by lining up the arrows so it fits into the tank and locks into place. Return the ring so it twists and locks into place, this keeps water from leaking. 3 4 Clean the red filter below the tank by wiping off any remaining dirt or debris. 12 www.BISSELL.com To return the tank: Angle the tank and insert bottom first. Then tilt the tank toward the machine and push the top in until it clicks into place. Did You Know? The Float Stack is what prevents your dirty tank from overflowing.