Bissell Carpet Cleaners User Guide - Page 15
Cleaning the Brush Roll & Nozzle
View all Bissell Carpet Cleaners manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cleaning the Brush Roll & Nozzle WARNING To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. NOTE: Be sure to clean the Brush Rolls and Nozzle before storing your machine. Follow these steps if your Nozzle becomes clogged with hair or debris. 1 2 Turn OFF and unplug the machine from the grounded outlet. Remove the Nozzle from the Foot: scoop and grip the Accessory Hose Door. Pull up to remove the Nozzle. 3 Next, remove the next layer, 4 the Brush Roll cover, to reveal the Brush Rolls. Press on the two release buttons and lift straight up. At this point, the Nozzle and Brush Roll cover can be rinsed under running water and the Nozzle Clean Out Tool can be inserted to unclog hair or debris. 5 6 click Use the comb to brush out the debris or hair from the Brush Rolls. When finished, return the Brush Roll cover by pushing it straight down. You will hear a "click" from each push button when the cover is pushed down into place. Line up the Nozzle from the edge near the floor and rotate to snap back into place. NOTICE: To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal components may result. www.BISSELL.com 15