Bosch HBL745AUC Use and Care Manual - Page 39

Replacing an Oven Light

Page 39 highlights

Do-It-Yourself Maintenance Bosch HBL7 / HBN7 Oven Use and Care Manual Replacing an Oven Light • Each oven is equipped with two halogen lights located in the back wall of the oven. • The lights are switched on when the door is opened or when the oven is in a cooking cycle. • The oven lights are not illuminated during SELFCLEAN. • Each light assembly consists of a removable lens, a light bulb as well as a light socket housing that is fixed in place. See Figure F. • Light blub replacement is considered to be a routine maintenance item. WARNING • Make sure the oven and lights are cool and power to the oven has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. • The lenses must be in place when using the oven. • The lenses serve to protect the light bulb from breaking. • The lenses are made of glass. Handle carefully to avoid breakage. Broken glass could cause an injury. To replace a light bulb: 1. Read WARNING on this page. 2. Turn off power at the main power supply (fuse or breaker box). 3. In convection ovens, remove the fan cover by unscrewing the four screws. 4. Remove the lens by unscrewing it. 5. Remove the light bulb from its socket by pulling it. 6. Replace the bulb with a new one.Avoid touching the bulb with fingers, as oils from hands can damage the bulb when it becomes hot. 7. The bulb is halogen 12V-20W. 8. Screw the lens back on. 9. Replace the fan cover if it is provided with the oven model. 10. Turn power back on at the main power supply (fuse or breaker box). Figure F Page 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

Bosch HBL7
/
HBN7 Oven Use and Care Manual
Replacing an Oven Light
Each oven is equipped with two halogen lights
located in the back wall of the oven.
The lights are switched on when the door is
opened or when the oven is in a cooking cycle.
The oven lights are not illuminated during SELF-
CLEAN.
Each light assembly consists of a removable lens, a
light bulb as well as a light socket housing that is
fixed in place. See Figure F.
Light blub replacement is considered to be a
routine maintenance item.
Page 37
Make sure the oven and lights are cool
and power to the oven has been turned
off before replacing the light bulb(s).
Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using
the oven.
The lenses serve to protect the light bulb
from breaking.
The lenses are made of glass. Handle
carefully to avoid breakage. Broken glass
could cause an injury.
WARNING
To replace a light bulb:
1.
Read WARNING on this page.
2.
Turn off power at the main power supply (fuse or
breaker box).
3.
In convection ovens, remove the fan cover by
unscrewing the four screws.
4.
Remove the lens by unscrewing it.
5.
Remove the light bulb from its socket by pulling
it.
6.
Replace the bulb with a new one. Avoid touching
the bulb with fingers, as oils from hands can damage
the bulb when it becomes hot.
7.
The bulb is halogen 12V-20W.
8.
Screw the lens back on.
9.
Replace the fan cover if it is provided with the
oven model.
10. Turn power back on at the main power supply
(fuse or breaker box).
Figure F
Do-It-Yourself Maintenance