Bowflex Xtreme 2 SE Assembly Manual - Page 10

Assembly Guide Step 1 Base Frame Assembly Parts: • Base Frame • Left Frame Rail • Right Frame Rail • Rear Cross Member Hardware: • 6 Button Head Screws ( 3/8" X 3/4") • 6 Flat Washers (3/8") Tool: 7 /32" Hex Wrench Left Frame Rail Button Head Screw Flat Washer 1-1 Lay all parts on floor as shown. 1-2 Insert Frame Rail connectors into the Base Frame and Rear Cross Member. Secure with screws and washers as shown. Finger tighten screws at this time. Base Frame Flat Washer Button Head Screw Button Head Screw Flat Washer Rear Cross Member Right Frame Rail Step 2  Lower Lat Tower Assembly Parts: • Lower Lat Tower Frame • Rod Box with Power Rod® Pack Hardware: • 3 Phillips Screws (#10 X 1") • 3 Flat Washers (1/4") Tool: Phillips Screw Driver Lower Lat Tower Frame 2-1 Lay parts on floor as shown. Firmly slide Rod Box into Lower Lat Tower Frame. 2-2 Fasten the Rod Box to the Lower Lat Tower Frame with screws and washers as shown. Tighten screws until snug. 6 Bowflex Xtreme® 2 SE Assembly Manual Self Threading Screws Flat Washers Rod Box w/ Rods