Bowflex Xtreme 2 SE Assembly Manual - Page 11

Assembly Guide Step 3 Install Lower Lat Tower Assembly Parts: • Lower Lat Tower Assembly • Base Frame Assembly Hardware: • 2 Button Head Screws (3/8" X 3/4") • 2 Flat Washers (3/8") Tool: 7/32" Hex Wrench 3-1 Align the Lower Lat Tower Assembly over the Base Frame. Push the bottom of the Lower Lat Tower onto the connector of the Rear Cross Member as shown. 3-2 S ecure Lower Lat Tower Assembly using screws and washers as shown. Finger tighten screws at this time. Lower Lat Tower Assembly Button Head Screw Flat Washer Base Frame Assembly Step 4 Install Seat Support Rail Parts: • Seat Support Rail • Base Frame Assembly Hardware: • 2 Button Head Screws (3/8" X 3/4") • 2 Flat Washers (3/8") Tool: 7/32" Hex Wrench Seat Support Rail Base Frame/ Lower Lat Tower Assembly 4-1 Slide the bottom of the Seat Support Rail onto the Base Frame connector as shown. 4-2 S lide the top of the Seat Support Rail onto the Lower Lat Tower Assembly connector as shown. Secure using screws and washers as shown. Finger tighten screws at this time. Flat Washer Button Head Screw Bowflex Xtreme® 2 SE Assembly Manual 7