Bowflex Xtreme 2 SE Assembly Manual - Page 17

Assembly Guide Step 13  Upper Lat Tower Assembly Parts: • Upper Lat Tower • Lat Cross Bar • Rear Lat Crossmember Hardware: • 2 Button Head Screws (3/8" X 3") • 2 Washers (3/8") • 2 Nylock Nuts (3/8") • 2 Button Head Screws (1/2" X 5 1/4") • 2 Wide Washers (1/2") • 2 Nylock Nuts (1/2") Tool: 7/32" Hex Wrench and Adjustable Wrench 13-1 Align the two holes on the Lat Cross Bar with those on the Upper Lat Tower as shown. 13-2 Attach using 3/8" screws, washers and nuts as shown. Note: Do not tighten hardware at this time. 13-3 Align the bracket on the Rear Lat Crossmember with the bolt on the Upper Lat Tower as shown. 13-4 Attach using 1/2" screws, washers and nuts as shown. 13-5 Tighten all hardware from this step. 3/8" Nut 3/8" Washer 1/2" Nut 3/8" Button Head Screw Lat Cross Bar 1/2" Washer 1/2" Button Head Screw Upper Lat Tower Step 14 Ab Crunch Station Assembly Parts: • Ab Crunch Bracket • Ab Cross Bar Hardware (1:1): • 2 Button Head Screws (3/8" X 2 3/4") • 4 Washers (3/8") • 2 Nylock Nuts 3/8 -16 Tool: 7/32" Hex Wrench 14-1 A ttach the Ab Cross Bar to the Ab Crunch Bracket as shown. Tighten all hardware. from this step. Button Head Screw Flat Washer Ab Lat Cross Bar Lock Nut Ab Bracket Bowflex Xtreme® 2 SE Assembly Manual 13