Bowflex Xtreme 2 SE Assembly Manual - Page 12

Assembly Guide Step 5 Install Squat Pulley Frame Parts: • Left Squat Pulley Frame • Right Squat Pulley Frame • Main Assembly • 2 Slider Pulleys w/o Decal • Left Squat Frame Connector • Right Squat Frame Connector Hardware: • 1 Button Head Screw (3/8" X 5") • 1 Nylock Nut (3/8") • 6 Button Head Screws (3/8" X 3/4") • 8 Washers (3/8") Tools: 7/32" Hex Wrench & Adjustable or Socket Wrench Slider Pulley Left Squat Pulley Frame Button Head Screws Flat Washers Detail 5b Left Squat Frame Connector Detail 5a Right Squat Frame Connector Right Squat Pulley Frame Slider Pulley 5-1 P lace one Squat Pulley Frame on each side of the Seat Support Rail as shown, and align the top screw holes. Secure using a 3/8" X 5" screw, washer and nut in the top hole as shown in Detail 5a. 5-2 Install screws and washers through the bottom holes of each Squat Pulley Frame into the Support Rail as shown in Detail 5a. 5-3 S lide one Slider Pulley onto the free end of the Left Squat Pulley Frame as shown in Detail 5b. Lock the pulley in position near the Support Rail. 5-4 S lide the Left Squat Frame Connector onto the end of the Left Frame Rail and the Left Squat Pulley Frame. 5-5 Install screws and washers to secure the Squat Frame Connector to the Squat Pulley Frame and the Frame Rail as shown in Detail 5b. 5-6 R epeat Steps 5-3 through 5-5 for the Right Squat Pulley Frame. 5" Button Head Screw 3/4" Button Head Screw Flat Washer Detail 5a Button Head Screw Flat Washer Slider Pulley Left Squat Frame Connector Flat Washer Nylock Nut Left Squat Pulley Frame Button Head Screw Flat Washer Detail 5b Left Frame Rail 8 Bowflex Xtreme® 2 SE Assembly Manual