Bowflex Xtreme 2 SE Assembly Manual - Page 6

Before Assembly Please take the time to read all assembly instructions before attempting to assemble your Bowflex Xtreme® 2 SE home gym. Select where you are going to locate your machine carefully. The best place for your Bowflex Xtreme® 2 SE home gym is on a hard, level surface. Select a workout area that provides a minimum clearance behind the rod box of 0.5 ft (15 cm) and a total width of 6.5 ft (2.0 m). Allow a minimum of 3.0 ft (0.9 m) free space in front of the machine. Every effort has been made to provide you with a clear and accurate assembly manual. Should you find any inconsistencies, have questions about your Bowflex Xtreme® 2 SE or have suggestions for improving our manuals, please call 800-628-8458 for assistance. Basic Assembly Principles Here are a few basic tips that will make your assembly of the Bowflex Xtreme® 2 SE home gym quick and easy. By using these principles, you can simplify each process and save yourself extra time and effort. 1.  To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2.  When tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure that it is fastened securely. 3.  When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt through the holes. 4.  As a general rule, and for all bolts and nuts on your Bowflex Xtreme® 2 SE home gym, turn bolts or nuts toward the right (clockwise) to tighten and left (counterclockwise) to loosen. Important: Leave all Cables coiled and wrapped until your Bowflex Xtreme® 2 SE Home Gym is fully assembled. 2 Bowflex Xtreme® 2 SE Assembly Manual