Bowflex Xtreme 2 SE Assembly Manual - Page 22
Cable and Pulley, Routing - Connect Rod Cables, through the Right Floating
View all Bowflex Xtreme 2 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Assembly Guide Step 19 Cable and Pulley Routing - Connect Rod Cables through the Right Floating and Lat Tower Pulleys Locate the following items for the Lat Pulley Housing assembly: • 3 & 8 Floating Pulleys (connected unit) • (2) Cable End Stop Balls with Core (see Detail) 19-1 L ocate the Right Rod Cable that you ran through the Lat Pulley Housing. Thread the Cable through the (3) Floating Pulley, as shown. 5 4 19-2 C ontinue to guide the Cable through the (4) Pulley on the Rear Lat Cross Bar, and then through the (5) Pulley on the Front Lat Cross Bar as shown. 19-3 Insert the Cable End through 2 the Cable End Stop Ball, and attach the Cable Core to keep the Cable from slipping back through the Pulleys. See Figure 19b. Note: T he Cable End Stop Ball Core 3 should fit over the Ferrue when installed correctly. Rotate the Core to align it with the groove in the Ball. 18 Bowflex Xtreme® 2 SE Assembly Manual