Brother International BAS-342G Basic Instruction Manual - English - Page 13
Installing the control box [2], least 10 mm away from the leg. If
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4-2. Installing the control box [2] CAUTION The control box is heavy, so installation should be carried out by two or more people. In addition, take steps to make sure that the control box does not fall down. If this is not done, injury to feet or damage to the control box may result. 4. INSTALLATION 3961M Before installing the control box (1), check that the model plate (a) on the control box (1) is "AX342G" to indicate that it is an RX-control box for BAS-342G sewing machines. * If the sewing machine is installed to the table, tilt back the machine head. (Refer to "4-5. Tilting back and returning the machine head".) (1) Control box (2) Bolts [4 pcs.] (3) Plain washers [4 pcs.] (4) Spring washers [4 pcs.] (5) Nuts [8 pcs.] NOTE: Check that the control box (1) is at least 10 mm away from the leg. If the control box (1) and the leg are too close together, it may result in incorrect sewing machine operation. 10mm or more Leg Operator 3962M (6) Power switch (7) Wood screws [2 pcs.] (8) Staples [7 pcs.] NOTE: Take care when tapping in the staples (8) to make sure that they do not pierce the power cord. 3963M BAS-342G 5