Brother International BAS-342G Basic Instruction Manual - English - Page 31
Installing the bobbin case
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5. PREPARATION BEFORE SEWING 5-5. Installing the bobbin case CAUTION Turn off the power switch before installing the bobbin case. If the foot switch is depressed by mistake, the sewing machine might start operating and injury could result. 2534Q 30mm 4002M 1. Pull the shuttle race cover (1) downward to open it. 2. While holding the bobbin so that the thread winds to the right, insert the bobbin into the bobbin case. 3. Pass the thread through the slot (2) and pull it out from the thread hole (3). 4. Check that the bobbin turns in the direction of the arrow when the thread is pulled. 5. Pass the thread through the lever thread hole (4), and then pull out approximately 30 mm of thread. 6. Hold the latch on the bobbin case and insert the bobbin case into the rotary hook. 2535Q BAS-342G 23