Brother International BAS-342G Basic Instruction Manual - English - Page 37

Setting the X-scale and Y-scale, 6-5. Setting the sewing speed, After completing the setting

Get Brother International BAS-342G PDF manuals and user guides View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-4. Setting the X-scale and Y-scale The scales are set to 100 (%) at the time of shipment from the factory. 1. Press the SELECT key (1) so that the X-SCALE indicator (2) (for X-scale setting) or the Y-SCALE indicator (3) (for Y-scale setting) is illuminated. • The setting value (%) will appear in the menu display (4). * When memory switch no. 402 is set to "ON", the settings will be displayed in units of mm. 2. Press the or key (5) to set the scale (0 − 400). • The program number will flash in the PROGRAM No. display (6). 3. Depress the work clamp switch (7) to lower the work clamp, and then depress the start switch (8). • The work clamp will move to the sewing start position, and then the scales will be applied. • The program number will stop flashing and illuminate steadily. NOTE: After completing the setting, be sure to refer to "6-6. Checking the sewing pattern" to check that the needle drop position is correct. 4013M 6-5. Setting the sewing speed The sewing speed is set to 2000 (rpm) at the time of shipment from the factory. 1. Press the SELECT key (1) until the SPEED indicator (2) illuminates. • The setting value (rpm) will appear in the menu display (3). 2. Press the or key (4) to set the sewing speed. (Sewing speed setting: 400 − 2700) 4956Q BAS-342G 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
6. USING THE OPERATION PANEL (BASIC OPERATIONS)
BAS-342G
29
6-4. Setting the X-scale and Y-scale
The scales are set to 100 (%) at the time of shipment from
the factory.
1. Press the SELECT key (1) so that the X-SCALE
indicator (2) (for X-scale setting) or the Y-SCALE
indicator (3) (for Y-scale setting) is illuminated.
•
The setting value (%) will appear in the menu display
(4).
* When memory switch no. 402 is set to "ON", the
settings will be displayed in units of mm.
2. Press the
or
key (5) to set the scale (0
−
400).
•
The program number will flash in the PROGRAM No.
display (6).
3. Depress the work clamp switch (7) to lower the work
clamp, and then depress the start switch (8).
•
The work clamp will move to the sewing start position,
and then the scales will be applied.
•
The program number will stop flashing and illuminate
steadily.
NOTE:
After completing the setting, be sure to refer to "6-6.
Checking the sewing pattern" to check that the needle
drop position is correct.
6-5. Setting the sewing speed
The sewing speed is set to 2000 (rpm) at the time of
shipment from the factory.
1. Press the SELECT key (1) until the SPEED indicator (2)
illuminates.
•
The setting value (rpm) will appear in the menu
display (3).
2. Press the
or
key (4) to set the sewing speed.
(Sewing speed setting: 400
−
2700)
4956Q
4013M