Brother International BAS-342G Basic Instruction Manual - English - Page 39
Setting the height of the intermittent presser foot, Intermittent presser foot height
View all Brother International BAS-342G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
6. USING THE OPERATION PANEL (BASIC OPERATIONS) 6-7. Setting the height of the intermittent presser foot You can use the operation panel to change the setting value for the intermittent presser foot height. 1 All indicators switch off Press the THREAD/CLAMP key. The sewing machine will switch to threading mode. • " 1" will appear in the PROGRAM No. display and the intermittent presser foot (1) will drop. THREAD/CLAMP indicator illuminates MENU indicator switches off 4445Q 4015M 2 Press the key. The sewing machine will switch to intermittent presser foot height setting mode. • " 4" will appear in the PROGRAM No. display and the intermittent presser foot (1) will rise to the setting value that appears in the menu display. (Intermittent presser foot height setting: 0.0 − 10.0) Press the or key to set the intermittent presser foot height. • The intermittent presser foot (1) will be raised or lowered to the height of the new value that has been set. NOTE: After making the setting, be sure to turn the pulley once by hand and check that the intermittent presser foot (1) does not touch the needle bar. 5225Q " 1" Threading mode ↑ ↓ " 4" Intermittent presser foot height setting mode 4016M 3 Ending setting mode Press the THREAD/CLAMP key. • The setting values will be memorized. • The intermittent presser foot (1) will return to the status that it was at before the sewing machine was switched to setting mode. THREAD/CLAMP indicator switches off Intermittent presser foot operation During standby When lowered While sewing 1 Intermittent presser foot lift amount 2 Intermittent presser foot height The settings can be made by the above operations. However, if the intermittent presser foot height is set to a smaller setting than the intermittent presser foot stroke, the intermittent presser foot will not drop in order to prevent it from coming into contact with the needle plate. 3 Intermittent stroke When making the adjustment, refer to "11-13. Changing the intermittent stroke" in the instruction manual CD. BAS-342G 5033Q 31