Brother International BAS-342G Basic Instruction Manual - English - Page 33

5-7. Home position detection 5. PREPARATION BEFORE SEWING 4004M Before starting home position detection, check that the needle bar is at the needle up stop position. Turn the pulley (1) until the ridge at the bottom of the thread take-up (2) is aligned with the { mark on the arm. Aligned 4005M 4421Q 1. Turn on the power switch. The POWER indicator (3) will illuminate, and the model name [342] will appear in the PROGRAM No. display (4) and [Air] will appear in the menu display (5). After this, the program number will flash in the PROGRAM No. display (4). 4006M 2. Depress the work clamp switch (6) to lower the work clamp, and then depress the start switch (7). (After home position detection is carried out, the work clamp will move to the sewing start position and then it will rise.) * For programs with a large number of stitches, the buzzer will sound after the home position is detected, and then the work clamp will move to the sewing start position. NOTE: If error "E110" is displayed when the start switch (7) is depressed, turn the pulley (1) in the direction of operation to clear the error display. 4007M 4008M BAS-342G 25