Brother International BE-1204B Instruction Manual - English - Page 159
Automatic Step Back, Automatic Hoop Feed, Select [Automatic Step Back] from Settings menu.
View all Brother International BE-1204B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Chapter 6 Embroidering Automatic Step Back Sets the number of stitches for automatic step back if thread breakage occurs. ! The number of stitches that can be set is from 0 to 255. ! Additional step-back can be made for sensitivity value of the thread breakage sensor. 1. Select [Automatic Step Back] from Settings menu. 2. Enter the number of stitches for automatic step back. 3. Click [OK]. Click here, and the value decreases/increases. Click here to give additional step-back for the sensing distance with the thread breakage sensor. W1127Q Automatic Hoop Feed Sets automatic hoop feed for a thread breakage. 1. Select [Automatic Hoop Feed] from Settings menu and put the check mark ( ). W1128Q BE-1204B-BC • BE-1206B-BC 6-33
BE-1204B-BC ° BE-1206B-BC
6-33
Chapter 6
Embroidering
Automatic Step Back
Sets the number of stitches for automatic step back if thread breakage occurs.
!
The number of stitches that can be set is from 0 to 255.
!
Additional step-back can be made for sensitivity value of the thread breakage sensor.
1.
Select [Automatic Step Back] from Settings menu.
2.
Enter the number of stitches for automatic step back.
W1127Q
3.
Click [OK].
Automatic Hoop Feed
Sets automatic hoop feed for a thread breakage.
1.
Select [Automatic Hoop Feed] from Settings menu and put the check mark (
).
W1128Q
Click here, and the value decreases/increases.
Click here to give additional step-back for the
sensing distance with the thread breakage sensor.